EBC 03-08 Chrysler Crossfire 3.2 Redstuff Front Brake Pads

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.
DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty
96 thru 2002 MERCEDES-BENZ E320 3.2 (1 Pin Rears)

Fitment:
Chrysler Crossfire Base 2004
Chrysler Crossfire Base 2005
Chrysler Crossfire Base 2006
Chrysler Crossfire Base 2007
Chrysler Crossfire Limited 2005
Chrysler Crossfire Limited 2006
Chrysler Crossfire Limited 2007
Chrysler Crossfire Limited 2008
Chrysler Crossfire SRT-6 2005
Chrysler Crossfire SRT-6 2006
Mercedes-Benz CLK320 Base 1998
Mercedes-Benz CLK320 Base 1999
Mercedes-Benz CLK320 Base 2000
Mercedes-Benz CLK320 Base 2001
Mercedes-Benz CLK320 Base 2002
Mercedes-Benz CLK430 Base 2000
Mercedes-Benz CLK430 Base 2001
Mercedes-Benz CLK430 Base 2002
Mercedes-Benz CLK430 Base 2003
Mercedes-Benz E300 Base 1998
Mercedes-Benz E300 Base 1999
Mercedes-Benz E320 4Matic 1998
Mercedes-Benz E320 4Matic 1999
Mercedes-Benz E320 4Matic 2000
Mercedes-Benz E320 4Matic 2001
Mercedes-Benz E320 4Matic 2002
Mercedes-Benz E320 4Matic 2003
Mercedes-Benz E320 4Matic 2004
Mercedes-Benz E320 4Matic 2005
Mercedes-Benz E320 Base 1996
Mercedes-Benz E320 Base 1997
Mercedes-Benz E320 Base 1998
Mercedes-Benz E320 Base 1999
Mercedes-Benz E320 Base 2000
Mercedes-Benz E320 Base 2001
Mercedes-Benz E320 Base 2002
Mercedes-Benz E320 Base 2003
Mercedes-Benz E320 Base 2004
Mercedes-Benz E320 Base 2005
Mercedes-Benz E320 CDI 2005
Mercedes-Benz E350 4Matic 2006
Mercedes-Benz E350 4Matic 2007
Mercedes-Benz E350 4Matic 2008
Mercedes-Benz E350 4Matic 2009
Mercedes-Benz E350 Base 2006
Mercedes-Benz E350 Base 2007
Mercedes-Benz E350 Base 2008
Mercedes-Benz E350 Base 2009
Mercedes-Benz E420 Base 1997
Mercedes-Benz E430 4Matic 2000
Mercedes-Benz E430 4Matic 2001
Mercedes-Benz E430 4Matic 2002
Mercedes-Benz E430 Base 1998
Mercedes-Benz E430 Base 1999
Mercedes-Benz E430 Base 2000
Mercedes-Benz E430 Base 2001
Mercedes-Benz E430 Base 2002
Mercedes-Benz SLK320 Base 2001
Mercedes-Benz SLK320 Base 2002
Mercedes-Benz SLK320 Base 2003
Mercedes-Benz SLK320 Base 2004