Motul 1L Synthetic Engine Oil 8100 0W20 ECO-LITE

Fully synthetic lubricant - Fuel Economy - for new Gasoline engines requiring a viscosity grade 20. Specially recommended for all new Gasoline engines of GM, CHRYSLER, FORD, HONDA, MAZDA, SUBARU and TOYOTA.
API Standard: API SN, ILSAC GF-5; OEM Approvals: GM dexos1 Gen2; OEM Performances: Chrysler MS-6395, Ford 947-A
TYPE OF USE: Fuel Economy Gasoline engine lubricant, specially designed for recent gasoline engines, turbocharged or naturally aspirated, direct or indirect injection, designed to use oil with low friction and very low HTHS (High Temperature High Shear) viscosity (= 2.6 mPa.s). Suitable for modern gasoline engines requiring a viscosity grade 20 and fuel economy lubricant (API SN standard).; Approved GM-dexos1 GEN2 for all new GM gasoline engines requiring this approval: BUICK, CADILLAC, CHEVROLET, GM, GMC, OPEL and VAUXHALL.; Compatible with Catalytic converter.; This type of oil may be unsuitable for use in some engines, refer to the owner manual if in doubt. ;PERFORMANCES: The API SN standard is fully backward compatible over API SM requirements and all former API standards. API SN lubricants provide outstanding oxidation resistance, better anti-deposits protection, better engine cleanliness, anti-wear protection and enhanced performance at cold temperature during the whole oil life span. Viscosity grade SAE 0W-20 minimizes lubricant hydrodynamic friction, allows fuel economy benefits especially when the oil is cold. Improves oil flow at start up, faster oil pressure build up, faster rev raisings and reach operating temperature faster. Environment friendly, this type of oil allows fuel consumption reduction and therefore minimizes greenhouse gases (CO2) emissions. ;RECOMMENDATIONS: Drain interval: according to manufacturers recommendations and tune to your own use. MOTUL 8100 Eco-lite 0W-20 can be mixed with synthetic or mineral oils. Before use always refer to the owner manual of the vehicle.